Avvitatori a impulso
AETHEL manufactures electric impact wrenches from 150 Nm up to 2,500 Nm, in 1/2-inch, 3/4-inch and 1-inch square drives, for automotive workshops, tyre and service chains, heavy maintenance and industrial assembly. Output torque is the number that sells this tool, and it is the number your customers compare first.
The range runs from 300 W compact models for light service work to 2,800 W heavy-duty units for truck, plant and structural bolting — all available under your brand with your colour, packaging and manual.
AL-IW-001AL-IW-001
150Nm 1/2-Inch Electric Impact Wrench 300W
Light 300W 1/2-inch square-drive electric impact wrench delivering 150Nm — the everyday choice for automotive tyre service, light assembly and maintenance work.
AL-IW-002AL-IW-002
200Nm 1/2-Inch Electric Impact Wrench 300W
300W 1/2-inch impact wrench with 200Nm breakaway torque and 1,900 RPM — sized for passenger-car wheel nuts, M10–M16 bolts and general workshop duty.
AL-IW-003AL-IW-003
250Nm 1/2-Inch Electric Impact Wrench 300W
Balanced 250Nm 1/2-inch impact wrench — enough torque for van and light-truck wheel service on a standard 300W motor and 220V supply.
AL-IW-004AL-IW-004
350Nm 1/2-Inch Electric Impact Wrench 600W
600W 1/2-inch impact wrench with 350Nm — the step up for truck wheel nuts, suspension work and M14–M22 structural fasteners.
AL-IW-005AL-IW-005
500Nm 3/4-Inch Electric Impact Wrench 600W
3/4-inch drive, 500Nm, 600W — the workshop-grade wrench for truck and bus wheel nuts and M18–M24 bolts.
AL-IW-006AL-IW-006
850Nm 1-Inch Electric Impact Wrench 1050W
1-inch drive 1050W impact wrench delivering 850Nm — built for truck tyre shops, steel structure bolting and M22–M30 fasteners.
AL-IW-007AL-IW-007
1100Nm 1-Inch Electric Impact Wrench 1050W
1100Nm 1-inch impact wrench for M24–M36 bolts — heavy vehicle repair, bridge and plant maintenance where hand tools are not enough.
AL-IW-008AL-IW-008
2500Nm 1-Inch Heavy-Duty Electric Impact Wrench 2800W
The flagship 2800W 1-inch impact wrench — 2500Nm for M30–M45 bolts in mining, port machinery, wind-tower and heavy plant maintenance.
AL-CW-001AL-CW-001
Cordless21V Brushless Cordless Impact Wrench 320Nm
320Nm brushless cordless impact wrench at 2,200 RPM with a 3.0Ah battery — sized for passenger-car wheel nuts and general workshop duty away from a power point.
AL-CW-002AL-CW-002
Cordless21V Brushless Cordless Impact Wrench 600Nm
600Nm brushless cordless impact wrench at 2,600 RPM — the middle step in the range, covering truck, van and plant maintenance that a 320Nm tool cannot shift.
AL-CW-003AL-CW-003
Cordless21V Brushless Cordless Impact Wrench 1000Nm
The 1,000Nm model at 2,800 RPM — the heaviest cordless impact wrench in the range, for truck, bus and plant bolting where a corded tool cannot reach.
What we build on the impact wrench line
Eight models cover the range: 150 Nm, 200 Nm and 250 Nm in 1/2-inch drive at 300 W; 350 Nm in 1/2-inch and 500 Nm in 3/4-inch at 600 W; 850 Nm and 1,100 Nm in 1-inch drive at 1,050 W; and a 2,500 Nm 1-inch heavy-duty unit at 2,800 W. Bolt capacity runs from M8–M12 on the compact end to M22–M30 on the heavy models, and no-load speeds sit between 1,400 and 1,900 RPM. Supply is 220 V, 50/60 Hz as standard, with the socket and accessory sets specified to your market. Cordless impact wrenches at 320Nm, 600Nm and 1,000Nm run on our shared 21V battery platform and are listed below.
How to specify an impact wrench order
Match the torque figure to the real job: workshops doing passenger-car service rarely need more than 350 Nm, while truck, bus and plant maintenance lives in the 850–2,500 Nm band. The square drive follows the torque — 1/2-inch for general service, 3/4-inch and 1-inch for heavy work — and the drive decides which sockets your customer will need, so the socket set is part of the specification. Confirm the voltage and plug standard for your market, the cable length, whether the tool ships with a case, and the sockets or adaptors you want in the box.
Private label and workshop-ready kits
Impact wrenches sell on torque and on kit contents. We build the tool with your brand on the housing, your colour on the body, your rating label and manual, and assemble the socket or accessory set your market expects so the product arrives as one sellable SKU rather than a bare tool and a separate box of sockets.
Certification and quality control
Models are built to CE and EMC requirements, with the certification package extended to your destination's rules where needed. Pre-shipment inspection covers appearance, function, torque output and the electrical safety tests the market requires — on a tool sold on its torque figure, the output check is the one your customer will notice.
MOQ, sampling and lead time
MOQ starts from 50 pieces on selected models and runs to around 300 pieces on others, depending on the model and how far you customise it. Sampling comes first: approve a pre-production unit, then the schedule runs from that date. If you are building a torque ladder for one brand, order the range together so the colour, labelling and packaging stay consistent across every step.
Complete the programme with one supplier
Impact wrench buyers usually need grinders, drills, rotary hammers and mixers too. Taking the whole programme from one manufacturer keeps one quality standard, one inspection report and one shipment across the container.
Tell us the torque range, square drive and target market — we will map the models, the socket kits and the MOQ for each.